e-invoicing

Rules

About current rules

Reglas Actuales lists the rules configured in Controller.

After you create a rule, it is listed in Reglas Actuales. Use this list to locate rules when you need to review, update, turn off, re-enable, or delete them.

To review a rule, click the circle with the plus symbol in its row. To edit or delete a rule, click the button with three vertical lines in its row.

A rule can have one of the following statuses:

ACTIVO

The rule is enabled and available for evaluation.

INACTIVO

The rule is turned off and not evaluated.

SOLO NOTIFICACIONES

The automatic action is turned off. The rule continues as a notification rule.

Create a notification or document delivery rule

  1. In Controller, select Distribución y Notificación v.2.
  2. Enter a value in Nombre.
  3. Enter a value in Descripción.
  4. Select a Canal.
    The selected channel determines which documents the rule evaluates and which rule options it makes available.
  5. Select the rule Estado.
    • ACTIVO: The rule is available for evaluation after it is saved.

    • INACTIVO: The rule is saved but not evaluated.

  6. Select a value from 1 to 20 in Prioridad.
  7. Select SI or NO in Aplica Proxy.
  8. In the Filtros section, select a filter.
  9. Select a condition, then enter or select a value.
  10. Click Agregar.
  11. Repeat steps 8 to 10 for each additional filter.
  12. Optional: Configure the Filtro de Proveedores o Clientes section.
    The customers and suppliers you can select depend on the channel and on the information you configured in Admin. Clientes and Admin. Proveedores.
  13. In the email notification section, enter one or more email addresses separated by semicolons.
  14. Select the attachments to send, such as PDF or XML.
  15. Select the roles to notify.
    You can select roles created in the Admin section.
  16. Select a response template, if needed.
  17. Optional: In Interoperabilidad, select a server connection to deliver the file if needed.
  18. Click Guardar.

The rule is saved and listed in Reglas Actuales. It is available for evaluation according to its status.

About OneClick rules

OneClick lets you enable predefined Controller rules without building a rule from scratch.

OneClick provides a set of preset rules. Select a preset rule, provide the information it requires, and activate it. The rule logic is already defined. You can enable and turn off the preset rules as needed.

When to use OneClick

Use OneClick when an available preset covers your scenario. If no preset covers the conditions or outcome you need, create a custom rule in Distribución y Notificación v.2.

What you still configure

Even though the rule logic is preset, you must still provide the information the preset requests, such as the role and the client. If you want the rule to send a notification, you can also enter the email addresses to notify.

Limitations

OneClick rules can't be customized beyond the fields each preset exposes.

Set up a OneClick rule

  1. In Multi Aplicaciones, select Controller.
  2. In Controller, select OneClick.
  3. Select the preset rule you want to use.
  4. Complete the required information.
  5. Click Guardar.

Controller saves the OneClick configuration.

Update a rule

  1. In Controller, select Distribución y Notificación v.2.
  2. In Reglas Actuales, locate the rule.
  3. Open the management options for the rule, and then click Editar.
  4. Make the needed changes.
  5. Click Guardar.

Controller saves the changes.

Disable a rule

  1. In Controller, select Distribución y Notificación v.2.
  2. In Reglas Actuales, locate the rule.
  3. Open the management options for the rule, and then click Editar.
  4. Change Estado to INACTIVO.
  5. Click Guardar.

Controller sets the rule to INACTIVO. To make a rule that was turned off available for evaluation again, see Re-enable a rule.

Re-enable a rule

  1. In Controller, select Distribución y Notificación v.2.
  2. In Reglas Actuales, locate the rule.
  3. Open the management options for the rule, and then click Editar.
  4. Change Estado to ACTIVO.
  5. Click Guardar.

Controller sets the rule to ACTIVO.

Remove a rule

  1. In Controller, select Distribución y Notificación v.2.
  2. In Reglas Actuales, locate the rule.
  3. Open the management options for the rule, and then click Eliminar.

Controller deletes the rule.

Review rule change history

  1. In Controller, select Historia Reglas.
  2. Select the rule you want to review.
  3. Review the rule's saved versions.

You can see the saved versions of the selected rule.

Request a custom rule configuration

Controller includes a set of configurable validations and actions. If the validation or action you need isn't available through the standard Controller configuration, you can request a custom rule configuration.

To request a custom configuration, open a support ticket. Professional Services evaluates the request and provides an estimate. If you accept the estimate, Professional Services implements the configuration.

Custom configurations may involve additional fees.