e-invoicing

Automatic actions

About automatic actions

Acciones Automáticas lists the automatic actions associated with existing Controller rules.

Automatic actions run when a rule matches its configured conditions. Using the Acciones Automáticas module, you can review the automatic-action details associated with an existing rule, upload the digital certificate required for automatic actions, and enable or turn off an automatic action associated with a rule.

To enable an automatic action, you must have access to the action and a valid digital certificate.

Controller runs the action under your account.

Turning off an automatic action doesn't remove the rule. The rule continues as a notification rule and is shown with the SOLO NOTIFICACIONES status.

Enable an automatic action for an existing rule

  • Create the rule.

  • You must have access to the action and a valid digital certificate and its password.

  1. In Controller, select Acciones Automáticas.
  2. Locate the rule.
  3. Open the action options for the rule.
  4. Select the automatic action to enable.
  5. Complete the required action options.
  6. Enter the certificate password when prompted.
  7. Confirm the action.

Controller associates the automatic action with the rule. Controller runs the action using your account.

Upload a digital certificate for automatic actions

You must have a valid digital certificate issued by Escritorio Acepta.

Obtain a valid digital certificate issued by the Acepta S.A. certification authority. If you don't have one, click Comprar Certificado.

  1. In Controller, select Acciones Automáticas.
  2. In Archivo, select the certificate file.
  3. In Clave, enter the certificate password.
  4. Click Subir.

Controller uploads the certificate.

Note:

Controller uses the same digital certificate you use to sign documents in Escritorio Acepta. You still need to upload it here even if you already installed it in Perfil Usuario. See Install your digital certificate .

Review automatic-action details

  1. In Controller, select Acciones Automáticas.
  2. Locate the rule.
  3. Expand the rule.

The automatic-action information for the selected rule is shown.

Disable an automatic action

  1. In Controller, select Acciones Automáticas.
  2. Locate the rule.
  3. Open the action options for the rule.
  4. Turn off the automatic action.
  5. Confirm the change.

Controller turns off the automatic action. The rule continues as a notification rule and is shown with the SOLO NOTIFICACIONES status.